Description
Specifications
•Stepping 0.1ms;
•Light intensity level 0 ～ 255;
•Pulse width 0.1ms ～ 999.9ms;
•Respond time<5μs ;
•Light intensity level 0 ～ 255;
•Pulse width 0.1ms ～ 999.9ms;
•Respond time<5μs ;
| Model | NTC-E2024DF-M8 |
| Power input | DC24V～30V 8A～16.5A |
| Power supply terminal | 5.08mm2EDGK-4P Butt plugs support 0.3mm²～2.5mm² wire diameter |
| Max output | 24V2A （ each channel) 398W （ 8 channels in total) |
| Output terminal | 2.54mm SM-3P Butt plug with empty pin in the middle |
| Drive mode | Constant Current Driving |
| Intensity control | 0～255（0 closed，255 max ） |
| Reverse power input protection | Yes |
| Output short circuit protection | Yes |
| Operating mode | Continuous and strobe (trigger voltage 5V ~ 24V) |
| Trigger delay response | ≤5us |
| Trigger delay pulse width | 0.1ms～999.9ms（0.1ms step length） |
| Trigger response frequency | ≤20KHz |
| Trigger access terminal | 3.81mm15EDGK-5P Butt plugs support 0.3mm²～1.5mm² wire diameter |
| Communication mode | RS-232（9600, 8N1,default address ：253） 10/100M Ethernet （ default IP：192.168.1.253，TCP port number：502） |
| Standby power consumption | <0.5W |
| Use environment (indoor) | Temperature; 0℃～40℃ ，humidity 25%~85%RH（No condensation) |
| Preservation environment (indoor) | Temperature -20℃～60℃ ，humidity 25%~85%RH（No condensation) |
| Cooling method | Active Fan Cooling |
| Installation method | Support DIN standard rail （35mm width） |
| Dimension （ L*W*H）mm | 103x95x127 |
| Weight(g) | 650g |
| Accessories | DC5.5X2.1mmfemale wire （35cm， wire diameter 0.5mm²）X1 |
| A patch cord is required when using spot light. | |
